Aqua
This is our range of 10 vibrant matt colours to improve the look of any type of area – from kitchens to toilets, this is the product for your colourful, cost effective needs.
Colours can be installed using either of our adhesives and is also available with our colour match co-extrusions or can be heat welded using a colour match weld rod, and silicone seal.
The impervious finish only requires a wash down with hot water and sanitiser for it to be hygienic, clean and at the same time retain appearance
Technical Specification
| Sheet dimensions | 2440 x 1220 x 2.5mm and 3050 x 1220 x 2.5mm |
| Colour(s) | 10x Matt |
| Impact strength ISO 179 | 3.0 |
| Specific Gravity ISO 1183 | 1.45 |
| Thermal conductivity at 20°C | 0.2 |
| Maximum service temperature | 60°C |
| Elastic modulus at bend | 3.5 x 10-3 |
| Surface spread of flame | BS476 PARTY Class 1 |
Architectural Specification
Supply and install Cocktail to a finished height or Colour Match heat welded joints using Interclad panel adhesive; thermoformed internal and external corners with Cladfix® Co-extrusions between panels. Provide an Interclad® Assurance on completion.
| Aqua | m2 |
| Aqua (less than 300mm) | m |
| Thermoformed internal/external corners | m |
| Waterproof sealant at abutments | m |
| Cutouts for service | No |
Colours
Shrimp
Lobster
Sea Urchin
Eel
Ocean
Seaweed
Seahorse
Stingray
Mussel
Orca
Standard Trims
Panel Joint (H) 2.5m/3.0m
End Stop (J) 2.5m/3.0m
External Corner (F) 2.5m/3.0m
Modified Panel Joint 2.5m only
Standard Trim Dimensions
Panel Joint (H)
End Stop (J)
External Corner (F)
Aqua
This is our range of 10 vibrant matt colours to improve the look of any type of area – from kitchens to toilets, this is the product for your colourful, cost effective needs.
Colours can be installed using either of our adhesives and is also available with our colour match co-extrusions or can be heat welded using a colour match weld rod, and silicone seal.
The impervious finish only requires a wash down with hot water and sanitiser for it to be hygienic, clean and at the same time retain appearance
Technical Specification
| Sheet dimensions | 2440 x 1220 x 2.5mm and 3050 x 1220 x 2.5mm |
| Colour(s) | 10x Matt |
| Impact strength ISO 179 | 3.0 |
| Specific Gravity ISO 1183 | 1.45 |
| Thermal conductivity at 20°C | 0.2 |
| Maximum service temperature | 60°C |
| Elastic modulus at bend | 3.5 x 10-3 |
| Surface spread of flame | BS476 PARTY Class 1 |
Architectural Specification
Supply and install Cocktail to a finished height or Colour Match heat welded joints using Interclad panel adhesive; thermoformed internal and external corners with Cladfix® Co-extrusions between panels. Provide an Interclad® Assurance on completion.
| Aqua | m2 |
| Aqua (less than 300mm) | m |
| Thermoformed internal/external corners | m |
| Waterproof sealant at abutments | m |
| Cutouts for service | No |
Colours
Shrimp
Lobster
Sea Urchin
Eel
Ocean
Seaweed
Seahorse
Stingray
Mussel
Orca
Standard Trims
Panel Joint (H) 2.5m/3.0m
End Stop (J) 2.5m/3.0m
External Corner (F) 2.5m/3.0m
Modified Panel Joint 2.5m only
Standard Trim Dimensions
Panel Joint (H)
End Stop (J)
External Corner (F)
The information on this site is to the best of our knowledge accurate and true. We are unable to accept responsibility in respect of factors which are outside our knowledge and control. In keeping with Interclad®‘s policy of continuous product development specifications may change without notice. Changes will only improve the specification of our products. Products can be selected to help meet guidelines of Approved Document M (ADM) and the Equality Act (DDA).
Caterclad® Waterfield® Interclad® Cladfix® Mediclad® Interlock™ Softwall™ SuperBond™ are Trade Marks of Interclad® Limited.
The information on this site is to the best of our knowledge accurate and true. We are unable to accept responsibility in respect of factors which are outside our knowledge and control. In keeping with Interclad®‘s policy of continuous product development specifications may change without notice. Changes will only improve the specification of our products. Products can be selected to help meet guidelines of Approved Document M (ADM) and the Equality Act (DDA).
Caterclad® Waterfield® Interclad® Cladfix® Mediclad® Interlock™ Softwall™ SuperBond™ are Trade Marks of Interclad® Limited.