Cocktail
Cocktail
This is our range of 10 vibrant gloss colours to improve the look of any type of area – from kitchens to toilets, this is the product for your colourful, cost effective needs.
Colours can be installed using either of our adhesives and is also available with our colour match co-extrusions or can be heat welded using a colour match weld rod, and silicone seal.
The impervious finish only requires a wash down with hot water and sanitiser for it to be hygienic, clean and at the same time retain appearance
Technical Specification
| Sheet dimensions | 2440 x 1220 x 2.5mm and 3050 x 1220 x 2.5mm |
| Colour(s) | 10x Gloss |
| Impact strength ISO 179 | 3.0 |
| Specific Gravity ISO 1183 | 1.45 |
| Thermal conductivity at 20°C | 0.2 |
| Maximum service temperature | 60°C |
| Elastic modulus at bend | 3.5 x 10-3 |
| Surface spread of flame | BS476 PARTY Class 1 |
Architectural Specification
Supply and install Cocktail to a finished height or Colour Match heat welded joints using Interclad panel adhesive; thermoformed internal and external corners with Cladfix® Co-extrusions between panels. Provide an Interclad® Assurance on completion.
| Cocktail | m2 |
| Cocktail (less than 300mm) | m |
| Thermoformed internal/external corners | m |
| Waterproof sealant at abutments | m |
| Cutouts for service | No |
Colours
Manhattan
Bloody Mary
Pink Champagne
Screwdriver
Apple Sour
Margarita
Mojito
Blue Lagoon
Galway Grey
Black Velvet
Standard Trims
Panel Joint (H) 2.5m/3.0m
End Stop (J) 2.5m/3.0m
External Corner (F) 2.5m/3.0m
Modified Panel Joint 2.5m only
Standard Trim Dimensions
Panel Joint (H)
End Stop (J)
External Corner (F)
Developed in conjunction with Senior Environmental Health Officers, Caterclad® is the wall finish you can be sure is proven safe and hygienic, where it counts the most – where food is prepared or provided. That is why Caterclad® is a popular choice in hotels and restaurants, schools, hospitals and food processing plants.
Caterclad® conforms to EU and UK requirements in respect of wall finishes in food environments. Caterclad® is the only PVC hygienic wall lining system that has the EU Reports PrEN 13823 exposure to thermal attack and PrEN ISO 11925-2: 1999 direct impingement of flame.
Caterclad® has Warrington Fire Research Centre Reports confirming a pass in both BS476 Part 6 – Fire Propagation – and BS476 Part 7 – Surface Spread of Flame. Caterclad® also complies with Paragraph A12(b) of Approved Document B, Fire Safety in Building Regulations 1991.
The impervious finish only requires a wash down with hot water and sanitiser for it to be hygienic, clean and at the same time retain appearance
Standard Trims
Panel Joint (H) 2.5m/3.0m
End Stop (J) 2.5m/3.0m
External Corner (F) 2.5m/3.0m
Modified Panel Joint 2.5m only
The information on this site is to the best of our knowledge accurate and true. We are unable to accept responsibility in respect of factors which are outside our knowledge and control. In keeping with Interclad®‘s policy of continuous product development specifications may change without notice. Changes will only improve the specification of our products. Products can be selected to help meet guidelines of Approved Document M (ADM) and the Equality Act (DDA).
Caterclad® Waterfield® Interclad® Cladfix® Mediclad® Interlock™ Softwall™ SuperBond™ are Trade Marks of Interclad® Limited.
The information on this site is to the best of our knowledge accurate and true. We are unable to accept responsibility in respect of factors which are outside our knowledge and control. In keeping with Interclad®‘s policy of continuous product development specifications may change without notice. Changes will only improve the specification of our products. Products can be selected to help meet guidelines of Approved Document M (ADM) and the Equality Act (DDA).
Caterclad® Waterfield® Interclad® Cladfix® Mediclad® Interlock™ Softwall™ SuperBond™ are Trade Marks of Interclad® Limited.